Oracle Application Server Portal Error Messages

WOR-70021 - The specified Reports Server object was not found.

Cause:

The Reports Server that was specified is not registered with OracleAS Portal.

Action:

Register the Reports Server, or specify the correct Reports Server name.

WOR-70024 - The specified Reports Calendar was not found

Cause:

The specified Reports Calendar does not exist or is not registered with OracleAS Portal.

Action:

Register the Ceports Calendar, or specify the correct Reports Calendar name.

WOR-70071 - cannot complete rwcalsum.show_control

Cause:

There was an internal error while rendering the calendar.

Action:

Contact Oracle Support Services.

WOR-70082 - not a valid number

Cause:

A value was entered that contains non-numeric characters.

Action:

Enter only numeric characters.

WOR-70135 - failed to save parameters

Cause:

The operation to save parameters failed.

Action:

This is an internal error. Contact Oracle Support Services.

WOR-70136 - failed to initialize Builder attributes - %0

Cause:

Initialization of the specified Reports Builder attributes failed.

Action:

Refer to the relevant Reports Builder error message, and take the appropriate action.

WOR-70137 - Failed to initialize servers - %0

Cause:

Initialization of the specified Reports Server failed.

Action:

Check that the Reports Server is properly registered.

WOR-70166 - Unable delete object %0 (version %1) from OracleAS Portal.

Cause:

The application was unable to delete the specified object.

Action:

This is an internal error. Contact Oracle Support Services.

WOR-70174 - Invalid error ID:

Cause:

An invalid error ID was specified.

Action:

This is an internal error. Contact Oracle Support Services.

WOR-70175 - Cannot access the server:

Cause:

The server is not accessible because the security check failed.

Action:

Contact your portal administrator to get access to the server.

WOR-70176 - Cannot access the printer:

Cause:

The printer is not accessible because the security check failed.

Action:

Contact your portal administrator to get access to the printer.

WOR-70177 - Cannot access the module.

Cause:

The module is not accessible because the security check failed.

Action:

Contact your portal administrator to get access to the module.

WOR-70178 - Cannot access the output type:

Cause:

The output type (destype) is not accessible because the security check failed.

Action:

Contact your portal administrator to get access to the output type.

WOR-70179 - Cannot access the output format:

Cause:

The output format (desformat) is not accessible because the security check failed.

Action:

Contact the portal administrator to get access to the output format.

WOR-70180 - Cannot run the report at this moment.

Cause:

The calendar check failed. The report cannot be run at this time.

Action:

Check the availability calendar to see when the report can be run.

WOR-70181 - Cannot use the server at this moment.

Cause:

The calendar check failed. The report cannot be run on this server at this time.

Action:

Check the availability calendar to see when the server can be used to run the report.

WOR-70182 - Cannot use the printer at this moment.

Cause:

The calendar check failed. Printing on this printer is not possible at this time.

Action:

Check the availability calendar to see when the report can be printed on this printer.

WOR-70183 - Generic access check failed.

Cause:

This generic access error indicates that you do not have the access privileges to perform this task.

Action:

Ask your portal administrator for the required privileges.

WOR-70184 - LOV access check failed for parameter:

Cause:

The LOV access check failed. You currently do not have the privileges required to access this LOV.

Action:

Ask your portal administrator for the required privileges.

WOR-70185 - Low range access check failed for parameter:

Cause:

The value specified is less than the valid lower limit for this parameter.

Action:

Specify a value within the valid range.

WOR-70186 - High range access check failed for parameter:

Cause:

The value specified is higher than the valid high limit for this parameter.

Action:

Specify a value within the valid range.

WOR-70187 - validation escape access check failed

Cause:

The validation trigger failed.

Action:

Contact your portal administrator.

WOR-70188 - No report was specified.

Cause:

A report name was not specified.

Action:

Specify a valid report name.

WOR-70189 - No server was specified.

Cause:

A server name was not specified.

Action:

Specify a valid server name.

WOR-70190 - Conflicting module and report names are specified.

Cause:

The report name and the module name are conflicting.

Action:

Ensure that the report name and the module name are the same.

WOR-70210 - An exception occurred when sending a request to the Reports Server.

Cause:

An exception occurred when sending a request to the Reports Server. The report was not sent.

Action:

Contact Oracle Support Services.

WOR-70212 - The Oracle Reports Web gateway URL setting was not specified. Cannot run report.

Cause:

The Oracle Reports Web gateway URL was not specified.

Action:

Edit the server component, and specify the Oracle Reports Web gateway.

WOR-70229 - Your browser cannot display this Reports portlet.

Cause:

The browser version is not supported. The Reports portlet cannot be displayed in this version of the browser.

Action:

Upgrade the browser version. Refer to the product documentation for supported browser versions.

WWC-00000 - Normal, successful completion

Cause:

The operation was successful if this message is displayed by itself. Unexpected errors may have occurred if other messages accompany this message.

Action:

None, if this message is displayed by itself. If other messages accompany this message, review the information in those error messages and take corrective action.

WWC-00001 - Message not found: %0.%1

Cause:

The message identified by the stated type/name combination was not found in the system message table.

Action:

This is an internal error. Contact Oracle Support Services.

WWC-00002 - Message ID not found: %0

Cause:

The message identified by the given id was not found in the system message table.

Action:

This is an internal error. Contact Oracle Support Services.

WWC-00006 - Internal error

Cause:

A process encountered a low-level, unexpected condition. This is the generic internal error number for program exceptions.

Action:

Report this error to Oracle Support Services and include the attempted operations that led to the error, any unusual circumstances that occurred before receiving this error message, and the complete stack trace produced by this error.

WWC-35002 - An attempt was made to access the session context without a valid session.

Cause:

User sessions are cleaned up by a background job after a specified time interval. An attempt was made to access a session that did not exist.

Action:

Close all browser instances to ensure that the session cookie is removed. Re-open the browser and login to the Single Sign-On Server again.

WWC-35006 - Unable to obtain session information from the cookie. Close your browser and reconnect.

Cause:

An error was encountered while decrypting the OracleAS Portal session cookie.

Action:

Close all browser instances to ensure that the session cookie is removed. Re-open the browser and login to the Single Sign-On Server again.

WWC-35009 - An unexpected error occurred, Error message: %1

Cause:

An unexpected exception occurred. The error message may provide further details.

Action:

Review the information in the error message and take appropriate corrective action.

WWC-35026 - The proxy was not found.

Cause:

The parameters specified to locate the proxy were not correct.

Action:

Check the parameters and provide the correct value.

WWC-35038 - The specified proxy already exists.

Cause:

A proxy with the specified name already exists.

Action:

Either use the existing proxy or specify a different proxy name.

WWC-35039 - The session context could not be restored because the session is marked as inactive.

Cause:

The session cookie contained session reference marked as inactive.

Action:

Close all browser instances to ensure that the session cookie is removed. Re-open the browser and login to the Single Sign-On Server again.

WWC-35040 - The session context could not be restored because the cookie value does not match the value stored in the session repository.

Cause:

The session cookie is not consistent with the user session in the repository.

Action:

Close all browser instances to ensure that the session cookie is removed. Re-open the browser and login to the Single Sign-On Server again.

WWC-35041 - This API can only be used in non web sessions.

Cause:

An attempt was made to call an API from a browser session but the API is designated to be called from a SQL session.

Action:

Check whether the API being called is meant for SQL sessions only. Do not call such APIs from a browser session.

WWC-35042 - The Globalization Support language code specified is not valid.

Cause:

The language abbreviation specified was invalid.

Action:

Specify a correct language abbreviation.

WWC-35043 - The value for the Globalization Support territory specified is not valid.

Cause:

The territory specified was invalid.

Action:

Specify a correct territory.

WWC-38164 - An error occurred while displaying the Navigator.

Cause:

An internal error occurred while generating the list of objects to display in the Navigator. This may be because the requested object has been deleted, or some other internal error.

Action:

Click the Navigator link at the top of the screen. If that does not solve the problem, restart your browser and try again.

WWC-40018 - General invalidation message processing exception: %1

Cause:

One of the following occurred:

1. An error occurred when an invalidation message was sent. This can occur when OracleAS Web Cache goes down, or is stopped while OracleAS Portal writes an invalidation message to the OracleAS Web Cache invalidation port.
2. Some other unexpected exception occurred while processing an invalidation message.

Action:

Ensure that OracleAS Web Cache is running and the invalidation port is accepting connections.

WWC-40019 - Could not open web cache connection.

Cause:

OracleAS Portal was not able to send the invalidation message to OracleAS Web Cache. This can happen if OracleAS Web Cache is enabled in OracleAS Portal and one or more of the following occurred:

1. OracleAS Web Cache was not running. It might have been stopped on purpose in order to front-end with the Oracle HTTP server, instead of OracleAS Web Cache. Alternatively, OracleAS Web Cache might have crashed, or it been restarted at the time when the invalidation messages were sent from OracleAS Portal or providers.
2. OracleAS Web Cache invalidation port problems were encountered. This can happen if the OracleAS Web Cache invalidation port value specified in OracleAS Portal is different from the actual OracleAS Web Cache invalidation port. Alternatively, the invalidation port value supplied to OracleAS Portal using the "-cport_i" parameter during installation could also have been wrong, or the OracleAS Web Cache invalidation port was changed in OracleAS Web Cache after the OracleAS Portal install.
3. Another process used the OracleAS Web Cache invalidation port before OracleAS Web Cache started listening on it.
4. Issues with the OracleAS Web Cache invalidation password were encountered. Either the OracleAS Web Cache invalidator password value in OracleAS Portal is different from the actual OracleAS Web Cache invalidator password, or the invalidator password value supplied to OracleAS Portal using the "-wc_inv_pwd" parameter during installation was wrong.
5. The invalidator password was provided instead of the OracleAS Web Cache administrator password for security setting changes in OracleAS Web Cache.
6. Issues with the OracleAS Web Cache hostname were encountered. Either the OracleAS Web Cache hostname value in OracleAS Portal is different from the actual OracleAS Web Cache hostname, or the hostname value supplied to OracleAS Portal using the "-host" and "-chost" parameters during the install was wrong.
7. OracleAS Web Cache moved to a different server after the OracleAS Portal installation and the host on which OracleAS Web Cache runs is inaccessible from OracleAS Portal.
8. The hostname specified did not include the entire domain name.
9. OracleAS Web Cache was not properly disabled. OracleAS Portal can work without OracleAS Web Cache front-ending the middle tier. To do this, "enable_wc_caching" flag in OracleAS Portal should be turned off. If this is not the done, any operation that attempts to send an invalidation message fails with exceptions such as "Portal Web Cache setting is On when Web Cache may be down".

Action:

Verify the cause of this behavior and take the appropriate corrective action.

WWC-40064 - Error invalidating content: Invalid username and/or password passed to Web Cache

Cause:

The invalidation failed because the incorrect user name and/or password was used.

Action:

In OracleAS Portal, update the information on the Cache tab of the Global Settings page to include the correct user name and password.

WWC-40065 - Error closing HTTP connection: Timeout occurred while communicating with Web Cache to send an invalidation

Cause:

The invalidation failed because of a time out which occurred while OracleAS Portal was attempting to read the response from OracleAS Web Cache

Action:

Make sure there is no network issue between OracleAS Portal and OracleAS Web Cache. Also, check whether the OracleAS Web Cache process is not responding.

WWC-41031 - Unable to connect to the LDAP server.

Cause:

The connection parameters required for connecting to the Oracle Internet Directory server were not available.

Action:

Use the APIs "wwsec_oid.get_oid_host" and "wwsec_oid.get_oid_port" to verify that the preference store values for Oracle Internet Directory parameters are exist and are valid. If necessary, run the command line script ptlasst in MIDTIER mode to configure the Oracle Internet Directory connection parameters: ptlasst.csh -mode MIDTIER -type OID

WWC-41078 - The user you are trying to create already exists. Specify a different user name.

Cause:

The user name specified already exists in Oracle Internet Directory.

Action:

Enter a different user name.

WWC-41082 - Email is a mandatory field. You must specify its value.

Cause:

The Email field was not populated.

Action:

Enter an e-mail address for the user.

WWC-41083 - You do not have permission to perform this operation.

Cause:

An attempt was made to perform an action with insufficient privileges.

Action:

Contact the portal administrator and request the necessary privileges be granted to perform this task.

WWC-41084 - A user name is required to proceed to the next step. Enter user name.

Cause:

No user name was provided.

Action:

Enter a valid user name in the Username field.

WWC-41094 - Unable to save default group - %1

Cause:

An error occurred while setting the default group for a given user.

Action:

Verify that the specified default group exists and the user has the necessary privileges to access this group.

WWC-41223 - Enter Group Name

Cause:

The group name field was empty.

Action:

Enter a group name.

WWC-41227 - Unauthorized to perform the operation

Cause:

An attempt was made to perform a task on a group, but the user did not have ownership, or the appropriate privileges to perform that task.

Action:

Contact the portal administrator. Either request to be added to the group's OWNER list, or that the necessary privileges be granted to perform the task.

WWC-41228 - Group Not Found

Cause:

An attempt was made to access a group but the specified group was not found.

Action:

Check the name of the group.

WWC-41229 - You do not have permission to perform this operation

Cause:

An attempt was made to perform a task but the user had insufficient privileges to perform the action.

Action:

Contact the portal administrator. Request the necessary privileges be granted to perform the task.

WWC-41239 - You are not an owner of this group

Cause:

An attempt was made to perform a task on a group but the user did not have ownership, or the privilege to perform that task.

Action:

Contact the portal administrator. Either request to be added to the group's OWNER list, or that the necessary privileges be granted to perform the task.

WWC-41358 - This group is not deletable or there is no such group found.

Cause:

One of the following occurred:

1. An attempt was made to delete a special group, such as the DBA or PORTAL_ADMIN group.
2. The specified group profile does not exist in Oracle Internet Directory.

Action:

Check the details of the group to be deleted.

WWC-41359 - The schema owner is not deletable.

Cause:

An attempt was made to delete the schema owner but the schema owner may not be deleted.

Action:

Check the details of the user to be deleted.

WWC-41401 - Group exists already

Cause:

An attempt was made to add a group but a group with the specified name already exists.

Action:

Either use the existing group, or specify a different group name.

WWC-41402 - There is no such group found

Cause:

An attempt was made to access a group that does not exist.

Action:

Check the name of the group required. If available, use the popup list to specify the group name.

WWC-41404 - The specified manager does not exist.

Cause:

The manager specified for a given user does not exist.

Action:

Check that the manager specified for the given user is correct. If available, use the popup list to specify the manager's name.

WWC-41405 - Already a member of the group.

Cause:

An attempt was made to add a user (or group) to a given group but the specified user (or group) is already a member of that group.

Action:

Check the name of the user (or group) being added.

WWC-41406 - The specified user does not exist.

Cause:

An attempt was made to access a user that does not exist.

Action:

Check the specified name of the user. If available popup list to specify the user's name.

WWC-41408 - No accessible object exception occurred.

Cause:

There are no objects on which the specified privilege(s) have been granted to given user.

Action:

Verify that the criteria specified is correct.

WWC-41409 - Invalid value specified.

Cause:

An attempt was made to call the API with invalid parameter values.

Action:

Check the values for the parameters.

WWC-41410 - The specified site does not exist.

Cause:

An attempt was made to access a site but the specified site ID does not exist.

Action:

Check the ID of the site specified.

WWC-41413 - The person id doesn't exist.

Cause:

An attempt was made to access a user but the specified user ID does not exist.

Action:

Check the ID of the user specified.

WWC-41415 - You do not have permission to perform this operation

Cause:

An attempt was made to perform an operation but the user did not have sufficient privileges. This error message is displayed in OracleAS Portal when viewing pages, or editing page layout or style.

Action:

Login to OracleAS Portal as a user with permissions to perform the operation. Alternatively, contact the portal administrator to request that the necessary privileges be granted.

WWC-41419 - Authentication failed. Try again.

Cause:

An attempt was made to login with incorrect password or user name details.

Action:

Login again using a valid user name and password combination. If your password is case-sensitive, enter the correct case for your password.

WWC-41426 - There is no such user or group found. Enter the name of a valid user or group and try again.

Cause:

While creating or editing a page, an invalid user or group name was specified when attempting to set access privileges for the page.

Action:

Check that the name for the user or group is valid. If necessary, use the popup list to specify the user or group name.

WWC-41428 - Adding the group as a member would result in a circular reference.

Cause:

An attempt was made to add a group as a member to itself.

Action:

Verify that the group being added as a member is different from the group to which it is being added.

WWC-41430 - You have entered an invalid group name. Group names should not exceed 50 characters.

Cause:

An attempt was made to enter a group name but the specified name was invalid.

Action:

Verify that the specified group name is less than 50 characters in length, or less than 255 bytes in length (for mutibyte character set databases).

WWC-41432 - The description you have entered exceeds 500 characters. Group descriptions must be 500 characters or less.

Cause:

The group description specified was too long

Action:

Enter a group description that is less than 500 characters in length.

WWC-41433 - Specify an appropriate database user name. It should be an existing proxy client to %1. The proxy client must not be the OracleAS Portal schema itself.

Cause:

When editing a user, an attempt was made to assign a database schema to the user's account but the specified database schema has not been granted connect privileges to the Portal schema.

Action:

Use the Schema portlet to create a new schema that can be assigned to users. Select the "Use this Schema for Portal Users" check box. To edit an existing schema for this purpose, select Edit Schema in the Schema portlet.

WWC-41438 - You cannot login because the login URL being retrieved for this application is not a fully qualified URL. Notify the administrator.

Cause:

OracleAS Portal was unable to construct the URL required to redirect to the OracleAS Single Sign-On Server. Partner application information may not be configured correctly.

Action:

Contact the portal administrator and request that OracleAS Portal is re-registered with the OracleAS Single Sign-On Server.

WWC-41439 - You cannot login because there is either invalid or no configuration information stored in the enabler configuration table (WWSEC_ENABLER_CONFIG_INFO$).

Cause:

One of the following occurred:

1. An alias defined in the Apache configuration caused Apache to translate host.domain.com to just host. If this is the case, the Login link will only shows host:port (dropping the domain)
2. The default domain was not set in the Apache configuration. When this occurs, only the hostname is shown in the Login link and the domain is not included.
3. OracleAS Portal was configured with an incorrect host or port.

Action:

Do one of the following:

1. Remove all such aliases from your Apache configuration.
2. Include the domain in the ServerName paramenter.
3. Fix the Host in the IASInstance element and ListenPort in the WebCacheComponent element in iasconfig.xml and run ptlconfig -dad portal -site. The ptlconfig script and the iasconfig.xml file are normally located in the directory portal/conf under the OracleAS Portal and OracleAS Wireless middle-tier home.

WWC-41440 - You cannot login because there was an error trying to parse the login URL for this application.

Cause:

A login request was made using a very long URL.

Action:

Check the URL and reduce its length if it appears to be too long. There is no theoretical limit for the length of the URLs.

WWC-41441 - You cannot login because an error occurred while retrieving the login URL.

Cause:

The login URL was not constructed successfully. The reason is unknown. This problem can occur if OracleAS Portal was unable to communicate with another component.

Action:

Ensure all components in the system are configured properly, are up and running, and functioning correctly.

WWC-41443 - %1, you have logged in to the OracleAS Single Sign-On Server, but you are not authorized to login to the OracleAS Portal. See your portal administrator to enable logins for your account.

Cause:

The option 'Allow User to Log On' was not selected for this user. The user may login to OracleAS Single Sign-On, but not OracleAS Portal.

Action:

Contact the portal administrator. Request that the 'Allow User to Log On' option is selected for this user.

WWC-41446 - The system failed to initialize the necessary HTTP request to the SSO Server.

Cause:

The OracleAS Single Sign-On Server may not be operational.

Action:

Check whether the OracleAS Single Sign-On Server is up and running.

WWC-41447 - The system failed to retrieve the necessary HTTP request to the SSO Server.

Cause:

This error occurs in the following cases:

1. The OracleAS Single Sign-On Server may not be operational.
2. There was an incorrect Querypath Url Prefix in the OracleAS Single Sign-On Server settings.

Action:

Do one of the following:

1. Check whether the OracleAS Single Sign-On Server is up and running.
2. Verify the Querypath Url Prefix in the OracleAS Single Sign-On Server settings.

WWC-41450 - An invalid or null argument was passed into this routine.

Cause:

An invalid or null argument was passed into this routine.

Action:

Check that valid parameter values are passed to this routine.

WWC-41451 - There is no external application username mapping for the given user and the given application.

Cause:

There was no external application user name mapping for the given user and the given application.

Action:

Login to the external application and save the login credentials in the password store by selecting the 'Remember My Login Information' check box on the application login screen.

WWC-41452 - The address from which this authentication request was made, does not match your IP address. Notify your administrator if you believe this message to be in error.

Cause:

The system has IP address checking enabled and the IP address from the the client did not match the IP address associated with the original authentication. Using a proxy server can cause this problem.

Action:

Disable IP address checking if a proxy server is being used.

WWC-41453 - The cookie version specified in the authentication message is not supported by this configuration. Notify your administrator.

Cause:

The OracleAS Single Sign-On Server does not support the version of the URLC token specified in the partner application configuration.

Action:

Contact the portal administrator. Request that OracleAS Portal be re-registered with the OracleAS Single Sign-On Server.

WWC-41454 - The decryption of the authentication information was unsuccessful. This may be caused by data inconsistency, an incorrect encryption key in this application's configuration, or an illegal access attempt. Notify your administrator.

Cause:

The URCL token received from the OracleAS Single Sign-On Server was not decrypted.

Action:

Contact the portal administrator to ensure that the OracleAS Portal configuration is correct. Request that OracleAS Portal be re-registered with the OracleAS Single Sign-On Server if required.

WWC-41470 - Error while connecting to the Oracle Internet Directory.

Cause:

The Oracle Iinternet Directory Server may not be operational.

Action:

Contact the portal administrator to ensure that the Oracle Internet Directory Server is operational.

WWC-41471 - Multiple groups with the given name were found in the directory. The group can't be resolved uniquely.

Cause:

Multiple groups with the given name were found in the directory.

Action:

Use the popup list next to the name field to find the group name.

WWC-41472 - An API used has been deprecated.

Cause:

An attempt was made to use a deprecated API.

Action:

Check the latest API documentation for alternatives to this API.

WWC-41496 - An error was encountered while refreshing the cache for OID Parameters.

Cause:

The Oracle Internet Directory Server may not be operational.

Action:

Check whether the Oracle Internet Directory port is operational and that the OracleAS Portal configuration is referring to the correct hostname and port. Use the command line script 'ldapbind' to check if the LDAP port is up and running.

WWC-41610 - The list of External Applications is too large.

Cause:

The list of External Applications returned from the OracleAS Single Sign-On Server was too large.

Action:

Try reducing the character length of External Application names by renaming them.

WWC-41611 - The Enabler Configuration is missing.

Cause:

The Partner Application domain was not correctly set in the OracleAS Single Sign-On Server configuration.

Action:

Run the command line script ptlasst in MIDTIER mode to configure the OracleAS Single Sign-On Server: ptlasst -mode MIDTIER -type SSO

WWC-41657 - Your account is locked. Ask your administrator to reset the password.

Cause:

The number of attempts to login with an incorrect password exceeded the maximum number allowed.

Action:

Contact your administrator to reset your password.

WWC-41742 - There is a conflict with your assigned user name. There is a user entry with this name, but with a different globally unique identifier, which must be resolved before you can log on with this name. Notify your administrator.

Cause:

One or both of the following occurred:

1. OracleAS Single Sign-On was using a stale user entry from its cache when transmitting user data to the OracleAS Portal repository.
2. The user profile for the specified user name already existed in the OracleAS Portal schema, but it contains an incorrect Globally Unique Identifier.

Action:

Contact the portal administrator to restart OracleAS Single Sign-On after diabling its cache. If the problem persists then request the portal administrator to delete the existing local user profile using the wwsec_api.delete_portal_user API. Then login using that user's credentials.

WWC-41743 - An exception was raised when accessing the Oracle Internet Directory: %1.

Cause:

An attempt was made to access the Oracle Internet Directory.

Action:

Refer to the additional information (if any) displayed with this error message and take the appropriate action. Contact your portal administrator if additional information is not available.

WWC-41744 - You do not have permission to perform this operation in the Oracle Internet Directory (error status: %1).

Cause:

An attempt was made to perform and action in the Oracle Internet Directory without sufficient access privileges.

Action:

Contact the portal administrator and request the necessary privileges be granted to perform this task.

WWC-41745 - An entry was not found in the Oracle Internet Directory (error status: %1).

Cause:

An attempt was made to access an Oracle Internet Directory entry that does not exist.

Action:

Check the value of the Oracle Internet Directory entry being accessed.

WWC-41746 - A value was not found in the Oracle Internet Directory (error status: %1).

Cause:

An attempt was made to search for an attribute value that does not exist in the specified directory entry.

Action:

Check that the name of the attribute being searched is correct.

WWC-41747 - Multiple matches were found for the specified criteria in the Oracle Internet Directory (error status: %1).

Cause:

Multiple matches were found for the specified criteria in the Oracle Internet Directory.

Action:

Verify that the specified search criteria is correct.

WWC-41748 - The specified entry or value already exists in the Oracle Internet Directory (error status: %1).

Cause:

An attempt was made to do one of the following:

1. Add a user or group entry in Oracle Internet Directory that already exists.
2. Add an owner/member to a group that has already been added.

Action:

Check the name of the user or group that is being added. Check it either as an owner, or as a member of a group.

WWC-41755 - No portlet was specified.

Cause:

An attempt was made to call a portlet with an invalid reference.

Action:

Remove the portlet and then add it again.

WWC-41778 - Delegated Administration Service (DAS) has not been configured properly. Contact the administrator.

Cause:

The DAS operation base URL was not specified in the Oracle Internet Directory.

Action:

Specify the DAS operation base URL in the Oracle Internet Directory and refresh the Oracle Internet Directory cache in the repository.

WWC-41780 - The system failed to process the HTTPS request to the SSO Server to retrieve the list of external applications.

Cause:

The wallet parameters were not available.

Action:

Specify a valid wallet path and wallet password to access the external application information from the OracleAS Single Sign-On Server using https.

WWC-41781 - The system failed to process the HTTPS request to the SSO Server with specified wallet details.

Cause:

The OracleAS Single Sign-On Server could not be reached using the given Query Path URL Prefix and the specified wallet parameters.

Action:

Verify that the Query Path URL Prefix, wallet path, and wallet password are correct and that the OracleAS Single Sign-On Server is up and running.

WWC-41875 - No external applications have been registered in the Oracle AS Single Sign-On Server.

Cause:

No external application existed.

Action:

Add an external application. Portal administrators with single sign-on administrator privileges can add external applications.

WWC-41876 - No external applications have been selected for display. To select applications to display, click "Personalize".

Cause:

One of the following occurred:

1. The portlet was customized to hide all external applications.
2. No external applications existed.

Action:

Do one of the following:

1. Display one or more applications in the portlet.
2. Add an external application. Portal administrators with single sign-on administrator privileges can add external applications.

WWC-41932 - The specified user already exists. Specify a different user name.

Cause:

An attempt was made to create a user that already exists in Oracle Internet Directory.

Action:

Specify a different user name.

WWC-41934 - An error occurred when attempting to set the default group.

Cause:

One of the following occurred:

1. An attempt was made to assign a group as the default group when the user was not a member of that group.
2. The user did not have sufficient privileges to perform this task.
3. An error occurred while accessing the Oracle Internet Directory.

Action:

Ensure that the user is already a member of the group when it is assigned as the default group. Report the error to your portal administrator and request that the appropriate privileges be granted if needed.

WWC-41935 - An error occurred when attempting to set the default page.

Cause:

An attempt was made to set the default page but the specified page does not exist.

Action:

Specify a valid default page name.

WWC-41937 - Password is a mandatory field. You must specify its value.

Cause:

A password was not specified.

Action:

Specify a password for the user.

WWC-41947 - User Name is a mandatory field. You must specify its value.

Cause:

A user name was not specified.

Action:

Specify a user name.

WWC-41948 - Confirm Password is a mandatory field. You must specify its value.

Cause:

The password was not confirmed.

Action:

Re-enter the password to ensure that it was entered correctly.

WWC-41966 - The preference store is missing the name of the schema required to perform this operation. You will be unable to continue.

Cause:

The name of the OracleAS Single Sign-On schema is not available in the preference store.

Action:

Re-register OracleAS Portal as a partner application.

WWC-41974 - You cannot access this screen because the enabler configuration is missing.

Cause:

An attempt was made to construct the URL required to access the OracleAS Single Sign-On Server but the enabler configuration was not found. This can occur if the host and/or port information stored in the enabler configuration is removed after the user logged in.

Action:

Contact the portal administrator. Request that OracleAS Portal be re-registered with the OracleAS Single Sign-On Server.

WWC-42001 - A null name was supplied. Supply a valid attribute name.

Cause:

A null value was provided for a required attribute.

Action:

Specify an appropriate value for the attribute.

WWC-43002 - You do not have permission to perform this operation

Cause:

An attempt was made to perform an action but the user had insufficient privileges to perform the action.

Action:

Contact the portal administrator and request the necessary privleges be granted to perform this task.

WWC-43007 - There were no entities in cache to invalidate.

Cause:

A message was sent to OracleAS Web Cache to invalidate an object, but the object was not found.

Action:

No action required.

WWC-43100 - A provider with this name has already been registered.

Cause:

An attempt was made to register a provider but the name specified has already been used.

Action:

Specify a different provider name.

WWC-43101 - This provider was not found.

Cause:

A provider with the name specified could not be found.

Action:

Make sure that you typed the name in correctly, or use the Navigator to find the provider you require.

WWC-43102 - The name field is empty.

Cause:

A name for the provider was not specified.

Action:

Specify a provider name.

WWC-43103 - The name field exceeds the maximum length.

Cause:

The provider name specified was too long.

Action:

Enter a provider name that is less than 200 characters in length.

WWC-43105 - The owning schema field is empty.

Cause:

An owning schema was not specified. This field is mandatory for database providers.

Action:

Enter an owning schema.

WWC-43106 - Schema %1 was not found.

Cause:

The schema entered was not found.

Action:

Enter a valid schema name.

WWC-43107 - The package name field is empty.

Cause:

The package name was not specified. This field is mandatory for database providers.

Action:

Enter a package name.

WWC-43109 - The package name exceeds the maximum length.

Cause:

The package name specified was too long.

Action:

Enter a package name that is less than 2000 characters in length.

WWC-43112 - The timeout must be left blank or be a positive value.

Cause:

The timeout value specified was a negative value.

Action:

Either leave the timeout blank or enter a positive value.

WWC-43113 - The value for login frequency is not valid.

Cause:

An invalid value for the login frequency was specified.

Action:

Set the login frequency to one of: Once, Always, Never or Public.

WWC-43116 - The specified node was not found.

Cause:

It was not possible to find the local portal node record.

Action:

Contact the portal administrator and report this error. This error indicates data inconsistencies in the portal instance.

WWC-43132 - The implementation package is not in a valid state.

Cause:

A PL/SQL package implementing a provider was in an 'INVALID' state. For example, the PL/SQL package may contain a syntax error, or reference a missing or invalid object.

Action:

Recompile the PL/SQL package. If the compilation fails, resolve the errors reported.

WWC-43133 - The implementation package was not found.

Cause:

A PL/SQL package or package body implementing a provider was not found.

Action:

Ensure the schema and package name specified for the provider is correct and that the PL/SQL package has been created in the specified schema.

WWC-43134 - An error occurred when attempting to call the providers register function.

Cause:

An attempt was made to register a provider.

Action:

Ensure that the provider is operational, and that the registration details are correct.

WWC-43135 - The Web URL for Web implementations is not valid.

Cause:

The URL specified for the Web provider was not valid, or was null.

Action:

Specify the correct Web provider URL.

WWC-43137 - An HTTP proxy was indicated but the proxy is invalid.

Cause:

It was specified that this provider required a proxy but the proxy definition provided was invalid.

Action:

Verify the proxy settings in the Global Settings page.

WWC-43139 - The Web application type is invalid.

Cause:

The Web provider had an invalid value for the HTTP application type.

Action:

Ensure that the HTTP application type is one of EXTERNAL_SECURED, PORTAL or null. Constants are defined for these values in the WWPRO_API_PROVIDER_REGISTRY public API package.

WWC-43140 - The Web external application id is invalid.

Cause:

The external application ID specified was not valid.

Action:

Use the list of values provided to select a valid value, or leave this field blank.

WWC-43141 - The following error occurred when converting "%1" into an integer: %2

Cause:

An attempt was made to convert a string into a number.

Action:

Review the reported error and take the appropriate action.

WWC-43144 - The following error occurred when converting "%1" into a date: %2

Cause:

An attempt was made to convert a string into a date.

Action:

Review the reported error and take the appropriate action.

WWC-43145 - The value "%1" is not a valid content type.

Cause:

The portlet content type specified was invalid.

Action:

Ensure that the portlet's content type is one of text/html or text/xml.

WWC-43146 - The specified shared key is not valid.

Cause:

The shared key specified was not valid.

Action:

Enter a key that is between 10 and 30 characters in length.

WWC-43147 - The following error occurred during the call to Web provider: %1

Cause:

A call to the Web provider failed with the specified error.

Action:

Review the reported error and take the appropriate action.

WWC-43167 - The specified name is invalid. Names are alphanumeric and cannot contain spaces or special characters.

Cause:

An invalid name was specified.

Action:

Enter a name that contains only letters, numbers, and underscores.

WWC-43169 - This provider is not deletable.

Cause:

An attempt was made to delete a provider that is offline or not deletable.

Action:

If the provider is offline, make it online before attempting to delete it.

WWC-43176 - The provider URL specified may be wrong or the provider is not running.

Cause:

OracleAS Portal could not contact the provider because the URL specified was either incorrect or the provider was not running.

Action:

Verify that the URL specified during provider registration is correct and that the provider is up and running. One way to verify this for a Web provider is to enter the URL in browser. If the provider information is correct and the provider is up, the provider's test page is displayed. If the URL is correct and the provider is up, there may be a problem with the configuration of the portal repository. Contact the portal administrator to enable debug logging in the portal repository and view the log information.

WWC-43183 - The portlet ID and portlet name must be unique within a provider

Cause:

An attempt was made to register a provider that contains portlets and the portlet names or portlet IDs are not unique within that provider.

Action:

Contact the developer responsible for the provider and request that this issue be resolved.

WWC-43184 - Invalid portlet ID

Cause:

The portlet ID was invalid or null.

Action:

Contact the developer responsible for the provider and request that this issue be resolved.

WWC-43185 - The portlet ID value of %1 is invalid. The portlet ID must be in the range -2147483648 to 2147483648.

Cause:

A portlet ID was not in a valid range.

Action:

Contact the developer responsible for the provider and request that this issue be resolved.

WWC-43186 - The portlet name for portlet with ID=%1 is null. The portlet name cannot be null.

Cause:

A portlet name was null.

Action:

Contact the developer responsible for the provider and request that this issue be resolved.

WWC-43187 - The portlet name '%1' contains space characters. The portlet name should not contain any space characters.

Cause:

A portlet name contained space characters.

Action:

Contact the developer responsible for the provider and request that this issue be resolved.

WWC-43188 - You have registered this web provider with the "Same Cookie Domain" checkbox checked.

Cause:

Cookies created by this provider are forwarded to the user's browser and managed by the browser instead of OracleAS Portal. Once managed by the browser, the cookies are sent to any other Web server that:

1. Is accessed within the same browser session.
2. Falls within the relaxed scope specified when the cookie was created.

Action:

This can result in cookie collisions and errors/loss of sessions in unrelated Web applications. To minimize the possibility of cookie collisions, ensure that:

1. Any custom cookies created by the Web provider have names that are unique to that Web provider.
2. All portal instances accessed using the Federated Portal Adapter are configured with different DAD names.
3. PDK-Java release 1 (JServ) Web providers requiring this setting are installed in uniquely named JServ servlet zones.
4. PDK-Java release 2 (OC4J) Web providers do not use this setting if they use servlet sessions. This is because the cookie used to identify the session is always called JSESSIONID. This name is specified in the Servlet 2.3 specification. Relaxing the scope of a JSESSIONID cookie will almost certainly cause session related problems to occur in other, unrelated, Web applications.

WWC-43192 - The provider package name %1 is reserved for internal use and cannot be used for registering a provider.

Cause:

The package name specified is reserved for internal use by OracleAS Portal. Users cannot use it for registering providers.

Action:

Specify a different package name.

WWC-43255 - Registration handle cannot be null.

Cause:

The registration handle used to refer to the registration of the provider in all provider communications was not present.

Action:

Check whether the provider has a registration port. If a registation port exists, contact the provider administrator and request that the provider supplies the necessary registration handle. If the provider expects an out-of-band registration handle, supply the value of the handle in the Connection tab.

WWC-43256 - Registration handle length exceeds 255 characters.

Cause:

The length of the registration handle generated or supplied for this registration exceeded 255 characters.

Action:

If you supplied the value for the registration handle as an out-of-band registration handle, provide a value that is less than 255 characters in length. If the registration handle is generated by the provider, contact the WSRP provider administrator.

WWC-43257 - Portlet handle cannot be null.

Cause:

The provider did not generate a handle for this portlet, or OracleAS Portal failed to store the portlet handle returned by the provider.

Action:

Contact the WSRP provider administrator or the portal administrator.

WWC-43258 - Portlet handle length exceeds 255 characters.

Cause:

The portlet handle returned by the WSRP Provider exceeded 255 characters.

Action:

Contact the WSRP provider administrator.

WWC-43259 - Translations for portlet multi-value attributes could not be fetched.

Cause:

The provider did not return translations for the portlet attributes, or OracleAS Portal failed to store them.

Action:

Contact the WSRP provider administrator or the portal administrator.

WWC-43273 - An error occurred during the call to the WSRP Provider: %1.

Cause:

A problem occurred while getting the service description. This may be because the provider sent unsupported extensions.

Action:

Try turning off extensions on the producer side or contact the WSRP provider administrator or portal administrator.

WWC-43274 - Markup types for the WSRP provider portlet "%1" [Provider id: %2] was not found in the Portlet Medatada Repository.

Cause:

If the WSRP provider's WSDL URL has changed, this may have caused existing portlets to be replaced with the portlets of the new provider. If the WSDL URL has not changed, there could be some data inconsistency.

Action:

Check for changes in the WSRP provider's registration URL. If the URL has not changed, try re-registering the provider.

WWC-43275 - The Web Service URL is either empty or not properly formed.

Cause:

The Web Service URL may be empty or it was not formed properly.

Action:

Provide a correct URL or contact the WSRP provider administrator.

WWC-43277 - The producer URL specified may be wrong or the producer is not running.

Cause:

The URL specified was either incorrect or the producer was not running. This caused a problem when OracleAS Portal tried to contact the producer using that URL.

Action:

Verify that the URL specified for the producer registration is correct and that the producer is up and running. One way to verify this is to enter the registration URL in a browser. If the URL is correct and the producer is up and running, you will see the producer's WSDL document.

WWC-43300 - The mode parameter must be MODE_SHOW, MODE_SHOW_ABOUT, MODE_SHOW_EDIT, MODE_SHOW_EDIT_DEFAULTS, MODE_SHOW_DETAILS, MODE_SHOW_HELP, or MODE_PREVIEW.

Cause:

A show request was made to a portlet with an invalid show mode.

Action:

Ensure that the show mode for the request is one of: MODE_SHOW, MODE_SHOW_ABOUT, MODE_SHOW_EDIT, MODE_SHOW_HELP, MODE_SHOW_EDIT_DEFAULTS, MODE_SHOW_DETAILS, MODE_PREVIEW, or MODE_LINK. Note that these constants are defined in the WWPRO_API_PROVIDER public API.

WWC-43302 - get_portlet returned an implementation type other than Database or Web for Portlet %1.%2.

Cause:

The portlet returned an invalid implementation type.

Action:

Ensure that the portlet implementation type is one of: PLSQL_IMPL or HTTP_IMPL. These constants are defined in the API WWPRO_API_PROVIDER_REGISTRY public API.

WWC-43303 - Web portlets can only be displayed in the parallel mode.

Cause:

A Web provider portlet was called by the PL/SQL API that was created to show PL/SQL portlets.

Action:

Contact the portal administrator. This message indicates data inconsistency.

WWC-43307 - You do not have permission to update the portlets ACL.

Cause:

Either an attempt was made to update the portlet's access control list (ACL), or the portlet is offline.

Action:

Contact the portal administrator. Request that the required privileges be granted, or ensure that the portlet is online.

WWC-43308 - The specified portlet was not found in the Portlet Metadata Repository.

Cause:

The specified portlet was not found in the Portlet Metadata Repository. This error suggests data inconsistency.

Action:

Refresh the provider that contains the portlet and attempt the operation again.

WWC-43309 - You do not have permission to access the portlet called "%1" (%2,%3).

Cause:

An attempt was made to access the portlet but the user had insufficient privileges.

Action:

Contact the portal administrator. Request access to the portlet be granted.

WWC-43310 - The specified portlet's provider is offline.

Cause:

An attempt was made to access a portlet but its provider was offline.

Action:

Ensure that the provider is online and attempt the operation again.

WWC-43722 - The Provider Group "%1" is not registered.

Cause:

The provider group specified was not found in the portal repository.

Action:

Ensure that the name of the provider group requested is correct.

WWC-43725 - The Provider Group "%1" is already registered with the Portal.

Cause:

The provider group specified was already registered with OracleAS Portal.

Action:

This error suggests data inconsistency. Contact the portal administrator.

WWC-43733 - Error accessing remote provider group server: %1

Cause:

An error occurred while accessing the remote provider group server.

Action:

Check the error text, and any subsequent error messages, for specific details. NOT_USED

WWC-43735 - The Provider Group "%2" defined by the server at URL "%1" is already registered with the Portal.

Cause:

An attempt was made to register a provider group but a provider group with the same details had already been registred with OracleAS Portal.

Action:

Use the provider group previously registered with these details.

WWC-44009 - The Name you specified is already in use. Recommended Name:%1

Cause:

An attempt was made to specify a page/tab name that already exists.

Action:

Specify a different name for the page/tab.

WWC-44081 - Specify a display name for this style.

Cause:

A display name was not specified when creating or copying a style.

Action:

Specify a display name for the style.

WWC-44085 - This region was already split.

Cause:

An attempt was made to split a region that was already split.

Action:

Specify a different region, that is, one which is not already split.

WWC-44087 - A region with this display name already exists.

Cause:

An attempt was made to create a region but a regions with the specified name already exists.

Action:

Specify a unique name for the region.

WWC-44089 - This region was not found.

Cause:

An attempt was made to delete, split, edit, or copy a region but the region could not be found.

Action:

Specify a valid region.

WWC-44090 - Cannot delete the main region.

Cause:

An attempt was made to delete the main region of the page but the main region cannot be deleted unless the page is deleted.

Action:

Specify a different region for deletion.

WWC-44091 - Specify a numeric value for the region width.

Cause:

An attempt was made to edit the width of a region but an non-numeric value was specified.

Action:

Ensure that the width value is an integer value (preferably between 1 and 100). If the width is a relative width, specify the % symbol (for example, 65%). If the width is an absolute width, specify only the numeric value (for example, 35).

WWC-44102 - Specify a Display Name.

Cause:

Name and display name values were not provided for a page.

Action:

Specify name and display name values for the page. These values may not be null.

WWC-44131 - You do not have permission to perform this operation.

Cause:

An attempt was made to perform an operation but the user did not have sufficient privileges.

Action:

Login to OracleAS Portal as a user with permissions to perform the operation. Alternatively, contact the portal administrator to request that the necessary privileges be granted.

WWC-44132 - Error while setting the default page.

Cause:

An attempt was made to set the default page for a user or group but the operation failed.

Action:

Attempt this task again. If the problem persists, contact the portal administrator.

WWC-44151 - This style was not found.

Cause:

An attempt was made to access a style but the specified style name and page group ID do not exist.

Action:

Provide a valid style name and page group ID.

WWC-44156 - Specify a display name for this layout.

Cause:

A display name was not specified when creating or copying a layout.

Action:

Enter a display name for the layout.

WWC-44214 - The URL specified is invalid.

Cause:

The value specified for a URL attribute did not begin with a valid protocol such as http://, https://, or ftp://.

Action:

Correct the url, entering a valid protocol.

WWC-44233 - The name that you entered is not valid. Valid names only contain alphabetic or numeric characters, plus underscore. No spaces or special characters are allowed. Enter a valid name.

Cause:

The name that was entered contained invalid characters.

Action:

Specify a different name using only the characters A to Z, a to z, 0 to 9, and underscore (_).

WWC-44234 - Page not found.

Cause:

An attempt was made to view or edit an OracleAS Portal page but the specified page does not exist

Action:

Check that the specified page name or page ID is correct.

WWC-44250 - You do not have permission to move the selected portlets.

Cause:

An attempt was made to move one or more portlets, but the user did not have the appropriate privileges.

Action:

Login as a user with Personalize (Full) privileges on the page containing the portlets. Alternatively, add the same portlet to the destination region and hide the portlet in the source region.

WWC-44251 - You do not have permission to move the selected objects.

Cause:

An attempt was made to move one or more items or portlets, but the user did not have the appropriate privileges.

Action:

Login as a user with either Manage Content privileges on the page containing the item or portlet, or Manage privileges on the item itself. Alternatively, add the same portlet to the destination region and hide the portlet in the source region.

WWC-44258 - You do not have permission to move content into the selected region.

Cause:

An attempt was made to add content to a region, but the user did not have the appropriate privileges.

Action:

Login as a user with the appropriate privileges to perform the operation.

WWC-44279 - The default page for the system cannot be deleted.

Cause:

An attempt was made to delete a system default page. Such pages cannot be deleted.

Action:

Do not attempt to delete this page.

WWC-44284 - Error while adding banner for the template.

Cause:

An attempt was made to set a page group's default navigation page, but the specified navigation page does not exist.

Action:

Select a different navigation page to be the page group's default navigation page.

WWC-44334 - Portlet Information could not be obtained.

Cause:

An attempt to access a portlet failed because the provider and/or portlet was not found.

Action:

Make sure the provider is online, the portlet is available, and that the user has permission to access the provider/portlet.

WWC-44366 - This page cannot be copied as a JSP

Cause:

An attempt was made to copy a page that is not a standard page as a JSP. Only standard pages can be copied as JSPs.

Action:

Choose a standard page when copying as a JSP.

WWC-44552 - Specify a numeric value for the space between portlets.

Cause:

When editing a region, a non-numeric value was specified for the "Space between Portlets" field.

Action:

Specify an integer value (preferably between 1 and 100) for the "Space between Portlets" field. If no space is required between portlets, specify 0 or null.

WWC-44570 - Specify a numeric value for the space around portlets.

Cause:

When editing a region, a non-numeric value was specified for the "Space around Portlets" field.

Action:

Specify an integer value (preferably between 1 and 100) for the "Space around Portlets" field. If no space is required around portlets, specify 0 or null.

WWC-44582 - Error while creating tab

Cause:

An attempt to add a tab failed. Either the specified tab name was invalid or the user does not have permission to add a tab.

Action:

Specify a valid name for the tab, or make sure that you have the appropriate privileges to add a tab.

WWC-44583 - Error while editing tab

Cause:

An attempt to edit a tab failed. Either the specified tab name was invalid or the user does not have permission to edit the tab.

Action:

Specify a valid name for the tab, or make sure that you have the appropriate privileges to edit the tab.

WWC-44650 - Specify a numeric value for item icon height.

Cause:

An invalid value was specified for the Item Icon Height field.

Action:

Specify a positive number for the height (in pixels) of item images.

WWC-44651 - Specify a numeric value for item icon width.

Cause:

An invalid value was specified for the Item Icon Width field.

Action:

Specify a positive number for the width (in pixels) of item images.

WWC-44652 - Invalid number of columns. Value should be at least be 1.

Cause:

An invalid value was specified for the number of columns.

Action:

Specify a positive number for the number of columns in the region.

WWC-44662 - To perform this action, select a portlet, item, or tab using the checkboxes below

Cause:

An action button was clicked without first selecting any portlets, items, or tabs.

Action:

Select one or more portlets, items, or tabs before clicking an action button.

WWC-44704 - Error while creating the page parameter

Cause:

An attempt to create a page parameter failed.

Action:

Refresh the screen and verify that the page is still available.

WWC-44705 - Error while reordering page parameter "%1"

Cause:

An attempt to reorder page parameters failed.

Action:

Refresh the screen and verify that the page and page parameter are still available.

WWC-44706 - Error while deleting page parameter "%1"

Cause:

An attempt to delete a page parameter failed.

Action:

Refresh the screen and verify that the page and page parameter are still available.

WWC-44707 - Error while editing page parameter "%1"

Cause:

An attempt to edit the value of a page parameter failed.

Action:

Refresh the screen and verify that the page parameter is still available.

WWC-44708 - Invalid page parameter name "%1"

Cause:

The specified page parameter name was invalid.

Action:

Enter a valid page parameter name. Refer to the Page Properties Parameter tab for a list of valid page parameter names.

WWC-44709 - Error while editing value of portlet parameter "%1"

Cause:

An attempt to edit the value of a portlet parameter failed.

Action:

Refresh the screen and verify that the portlet parameter is still available.

WWC-44714 - Error while personalizing page parameter "%1"

Cause:

An attempt to personalize a page parameter failed.

Action:

Refresh the screen and verify that the page parameter is still available.

WWC-44715 - Error while resetting page parameters to default values.

Cause:

An attempt to reset page parameters to their default values failed.

Action:

Refresh the screen and verify that the personalization screen is still available.

WWC-44721 - Error while fetching portlet parameters

Cause:

An attempt to fetch portlet parameters failed.

Action:

Refresh the screen and verify that the portlet is still available.

WWC-44751 - Error while editing value of parameter "%1"

Cause:

An attempt to edit the value of an event parameter failed.

Action:

Refresh the screen and verify that the event parameter is still available.

WWC-44752 - Error while linking event "%1" to page "%2"

Cause:

An attempt to link an event to a page failed.

Action:

Refresh the screen and verify that the event and the page are still available.

WWC-44753 - Error while removing link from event "%1"

Cause:

An attempt to remove a link from an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44754 - Error while updating link between event "%1" and page "%2"

Cause:

An attempt to update the target page for an event failed.

Action:

Refresh the screen and verify that the event and the page are still available.

WWC-44755 - Invalid event output name "%1"

Cause:

The specified event output name was invalid.

Action:

Specify a valid event output name.

WWC-44756 - The name that you entered has already been used. Pick a name that is unique.

Cause:

The specified name has already been used.

Action:

Specify a different, unique name.

WWC-44757 - Error while creating the parameter: %1

Cause:

An attempt to create a parameter failed.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44758 - Error while editing the parameter: %1

Cause:

An attempt to edit a parameter failed.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44759 - Parameter cannot be personalized

Cause:

An attempt to personalize a parameter failed. The parameter cannot be personalized.

Action:

Refresh the screen and verify whether or not the parameter is personalizable.

WWC-44761 - Error while deleting parameter: %1

Cause:

An attempt to delete a parameter failed.

Action:

Refresh the screen and verify that the parent object and the parameter are still available.

WWC-44762 - Parameter "%1" not found

Cause:

The specified parameter was not found.

Action:

Refresh the screen and verify that the parent object is still available and that the user has the appropriate access permissions.

WWC-44765 - Search for parameter "%1" caused an error: %2

Cause:

An attempt to search for a parameter failed.

Action:

Refresh the screen and verify that the object is still available and that the user has the appropriate access permissions.

WWC-44766 - Error while creating the parameter mapping: %1

Cause:

An attempt to create a parameter map failed.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44767 - Error while updating the parameter mapping: %1

Cause:

An attempt to edit a parameter map failed.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44768 - Unsupported from type "%1"

Cause:

The source object type specified is not supported.

Action:

Select a different source object.

WWC-44769 - Parameter "%1" already has the smallest display order and can't be moved up.

Cause:

An attempt was made to move the first parameter in the list to the top of the display order.

Action:

Refresh the screen and verify that the parameter is already at the top of the display order.

WWC-44770 - Moving parameter "%1" up in the display order failed: %2

Cause:

An attempt to move a parameter up in the display order failed.

Action:

Refresh the screen and verify that the parameter is still available.

WWC-44775 - Flow element not found

Cause:

The specified flow element was not found.

Action:

Refresh the screen and verify that the dependent object is still available.

WWC-44779 - Error while creating flow link "%1"

Cause:

An attempt to create a flow link failed.

Action:

Refresh the screen and verify that the parent page is still available.

WWC-44780 - Error while deleting flow link "%1"

Cause:

An attempt to delete flow link failed.

Action:

Refresh the screen and verify that the parent page is still available.

WWC-44781 - Flow link not found

Cause:

The specified flow link was not found.

Action:

Refresh the screen and verify that the parent page is still available.

WWC-44783 - Invalid parent type for event "%1"

Cause:

The specified parent object did not have a valid type.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44784 - Parent of event "%1" is not a portlet

Cause:

The specified parent object was not a portlet.

Action:

Specify a portlet.

WWC-44786 - Event "%1" already exists

Cause:

The specified event name already exists.

Action:

Specify a different, unique event name.

WWC-44787 - Error while creating event "%1": %2

Cause:

An attempt create an event failed.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44788 - Error while deleting event: %1

Cause:

An attempt to delete an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44789 - Error while deleting events: %1

Cause:

An attempt to delete events failed.

Action:

Refresh the screen and verify that the events are still available.

WWC-44790 - Event not found

Cause:

The specified event was not found.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44791 - Event "%1" not found

Cause:

The specified event was not found.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-44792 - Events not found

Cause:

The specified events were not found.

Action:

Refresh the screen and verify that the parent objects are still available.

WWC-44793 - Error while creating event map: %1

Cause:

An attempt to create an event map failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44794 - Error while deleting event map: %1

Cause:

An attempt to delete an event map failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44795 - Event map not found

Cause:

The specified event map was not found.

Action:

Verify that the parent object is still available.

WWC-44801 - Error while searching for parameter mapping: %1

Cause:

The specified parameter map was not found.

Action:

Refresh the screen, verify that the parent object is still available and that the user has the appropriate access permissions.

WWC-44803 - Duplicate event maps not allowed

Cause:

An attempt was made to duplicate an event map.

Action:

Edit or delete the existing event map, or create a new event map.

WWC-44812 - Error while fetching portlet events

Cause:

An attempt to fetch portlet events failed.

Action:

Refresh the screen and verify that the portlet is still available.

WWC-44815 - Error while retrieving link from event "%1"

Cause:

An attempt to retrieve the link from an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44816 - Error while retrieving the target page for event "%1"

Cause:

An attempt to retrieve the target page for an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44829 - Error while writing parameter map metadata: %1

Cause:

An attempt to write parameter map metadata failed.

Action:

Refresh the screen and verify that the parameter map is still available.

WWC-44833 - Error adding display name or description for event "%1"

Cause:

An attempt to add a display name or description for an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44834 - Error while editing the event: %1

Cause:

An attempt to edit an event failed.

Action:

Refresh the screen and verify that the event is still available.

WWC-44835 - Error while creating page event from portlet event "%1": %2

Cause:

An attempt to create a page event from a portlet event failed.

Action:

Refresh the screen and verify that the portlet event is still available.

WWC-44836 - Error while invalidating page cache after updating event: %1

Cause:

An attempt to invalidate the page cache after updating an event failed.

Action:

Refresh the screen and verify that the event or dependent object is still available.

WWC-44840 - Invalid context for parameter "%1"

Cause:

The parent object (portlet, page, or event) for the parameter was not valid.

Action:

Refresh the screen and verify that the parent object still exists.

WWC-44841 - Error during a parameter change event: %1

Cause:

An attempt to update a parameter failed.

Action:

Refresh the screen and verify that the parameter and/or dependent object are still available.

WWC-44843 - Page not found: %1,%2

Cause:

The specified page was not found.

Action:

Verify that the page exists and that the details of the specified page are correct.

WWC-44875 - Portal Template not found

Cause:

An attempt was made to base a page on an invalid template.

Action:

Specify a valid template.

WWC-44891 - The system variable "%1" is not valid. Choose a different value.

Cause:

An invalid system variable was specified.

Action:

Specify a valid system variable, one of USER_NAME, USER_ID, COMPANY_NAME, SUBSCRIBER_ID, NLS_LANG, or NLS_TERRITORY.

WWC-44899 - Error during a parameter map change event: %1

Cause:

An attempt to update a parameter map failed.

Action:

Refresh the screen and verify that the parameter map and/or the dependent objects are still available.

WWC-44901 - Error while deleting flow link children: %1

Cause:

An attempt to delete the children of a flow link failed.

Action:

Refresh the screen and verify that the dependent objects are still available.

WWC-44902 - Error while deleting parameter maps: %1

Cause:

An attempt to delete parameter maps failed.

Action:

Refresh the screen and verify that the dependent objects are still available.

WWC-44929 - You can only download jsp file for a JSP page.

Cause:

An attempt was made to download a JSP file from a non-JSP type page.

Action:

Specify a JSP page to download.

WWC-44930 - You do not have privileges to download the jsp file for this JSP page.

Cause:

An attempt was made to download the JSP file of a JSP page without the appropriate permissions.

Action:

Login as a user with permissions to perform the operation.

WWC-44932 - The page's template cannot be changed to "%1" because the page contains portlets or items and the selected template has no portlet regions or item regions.

Cause:

A template was selected without an item region or portlet region for the items or portlets on the page.

Action:

Choose a different template. Make sure that the template contains the necessary region types.

WWC-44997 - An error occurred while refreshing the portlet repository. Because this page is published as a portlet, you may want to refresh the repository manually.

Cause:

An attempt to refresh the portlet repository failed.

Action:

The page is published as a portlet. Refresh the repository manually.

WWC-45026 - Number of objects in each section must be a number greater than zero

Cause:

An invalid value was specified for the number of objects in each section.

Action:

Specify a number greater than zero.

WWC-45235 - Number entered for the limit must be a valid number greater than or equal to zero.

Cause:

An invalid number value was specified for the limit.

Action:

Specify a valid number between 0 and 50.

WWC-45256 - This page group does is not configured to allow JSP access.

Cause:

An attempt was made to copy a JSP to a page group that is not configured to allow JSP access.

Action:

Edit the properties of the page group and, on the Configure tab, enable "JSP Access".

WWC-45290 - The portlet was not found (%1 , %2)

Cause:

An attempt was made to access a portlet with a given portlet ID and provider ID, using the API call wwsbr_folder_portlet.describe_parameters. The specified portlet was not found.

Action:

Ensure that the specified provider ID and portlet ID are correct.

WWC-46800 - Document not found.

Cause:

An attempt was made to access a document does not exist, is not longer accessible.

Action:

Verify that the specified URL is still valid, if applicable. Visit the parent page to check that the item still exists.

WWC-46805 - You do not have permission to perform this operation.

Cause:

An attempt was made to perform an action but the user does not have the appropriate permissions.

Action:

Login as a user who has permission to perform the operation.

WWC-46811 - Your file cannot be uploaded because it is larger than the maximum allowed file size.

Cause:

An attempt was made to upload a file that exceeds the maximum size allowed per file.

Action:

Reduce the size of the file, or contact the portal administrator and request that the maximum permitted file size be increased.

WWC-46813 - Your file cannot be uploaded because doing so would exceed the total amount of space allocated for uploaded files.

Cause:

An attempt was made to upload a file that would result in the allocated space quota being exceeded.

Action:

Create some free space by deleting other documents, or contact the portal administrator and request that the quota allocation be increased.

WWC-47499 - You do not have permission to access this screen.

Cause:

An attempt was made to access a screen but the user does not have sufficient privileges.

Action:

Login as a user with at least the 'All Logs - Edit' privilege.

WWC-49100 - Unable to locate type %1.

Cause:

An attempt was made to load a non-existing dynamic type.

Action:

Verify the name of the dynamic type.

WWC-49101 - Invalid conversion requested for type %1.

Cause:

A mismatch occurred between the dynamic type loaded and the requested conversion type. For example, the type_to_number() method was invoked after loading a date type.

Action:

Ensure that the type loaded and the requested conversion type match. For example, if a number type is loaded a number, invoke the type_to_number() method for conversion.

WWC-49102 - No conversion performed for type %1, value %2.

Cause:

The value provided could not be converted to the requested type using the available format masks. The format mask used may be invalid.

Action:

Provide a valid format mask.

WWC-50003 - Object not found.

Cause:

The specified path to the given object does not exist.

Action:

Check that the path is valid. Path names are case-sensitive.

WWC-50015 - You do not have permission to perform this operation.

Cause:

An attempt was made to peform an operation but the user does not have the appropriate permissions.

Action:

Login as a user who has permission to perform the operation.

WWC-53100 - General error

Cause:

An attempt to access the Oracle Internet Directory failed.

Action:

Wait for a while and attempt the operation again. Contact the portal administrator if the problen persists.

WWC-53101 - Invalid input parameter

Cause:

Invalid values were specified for input parameters.

Action:

Check the specified input parameter values.

WWC-53102 - The specified user is not a member of any group

Cause:

The specified user is not a member of any group.

Action:

Check the specified user name.

WWC-53103 - The specified subscriber does not exist in the directory

Cause:

An attempt was made to access a subscriber that does not exist in the directory.

Action:

Check the name of the subscriber required.

WWC-53104 - The specified user does not exist in the directory

Cause:

The specified user does not exist in the directory.

Action:

Check the name of the specified user.

WWC-53105 - The root oracle context doesn't exist in the directory

Cause:

The root Oracle Context was not found in the directory.

Action:

Check the Oracle Internet Directory Server configuration and ensure the root Oracle Context information is loaded properly.

WWC-53106 - Multiple subscriber entries were found for the specified subscriber nickname

Cause:

Multiple subscriber entries with the same subscriber nickname were found in the Oracle Internet Directory.

Action:

Verify that the nickname attribute of subscribers in the Oracle Internet Directory are unique.

WWC-53107 - Root oracle context doesn't contain all the required information

Cause:

The root Oracle Context level was not found.

Action:

Check the Oracle Internet Directory Server configuration and ensure that the root Oracle Context information is loaded properly.

WWC-53108 - Oracle context doesn't exist for the subscriber

Cause:

Oracle Context was not found for the subscriber.

Action:

Check the Oracle Internet Directory Server configuration and ensure that the subscriber Oracle Context information is loaded properly.

WWC-53109 - Oracle context for the subscriber is invalid

Cause:

Oracle Context for the subscriber was invalid.

Action:

Check the Oracle Internet Directory Server configuration and ensure that the subscriber Oracle Context information is loaded properly.

WWC-53110 - Multiple user entries exist for the specified user nickname

Cause:

Multiple users with the given name were found in the directory.

Action:

Use the popup list next to the name field to specify the user name.

WWC-53111 - The specified group doesn't exist in the directory

Cause:

An attempt was made to access a group that does not exist in the directory.

Action:

Check the name of the group required.

WWC-53112 - Multiple group entries exist for the specified group nickname in the directory

Cause:

Multiple groups with the given name were found in the directory.

Action:

Check that the group name is valid. Use the popup list next to the name field to specify the group name.

WWC-53113 - Your account is locked. Have your administrator reset your password, or wait for the lockout duration to transpire

Cause:

The user account was locked because the number of failed login attempts exceeded the maximum number allowed, as specified by the password policy.

Action:

Contact the portal administrator and request that the password be reset. Alternatively, wait for the lockout period to expire.

WWC-53114 - Your password is about to expire and should be changed

Cause:

A password is about to expire.

Action:

Change the password before it expires.

WWC-53115 - Your username or password is incorrect

Cause:

An attempt was made to authenticate with incorrect login credentials.

Action:

Specify the correct login credentials.

WWC-53116 - Your password has expired

Cause:

A password has expired.

Action:

Contact the portal administrator and request that the password be reset.

WWC-53117 - The entity handle properties are being reset by the caller

Cause:

An unexpected condition was encountered.

Action:

Report this error to Oracle Support Services. Include the operations that led to the error, any unusual circumstances that occurred before receiving this error, and the complete stack trace produced by this error.

WWC-53118 - Unable to locate the subscriber for the specified user

Cause:

An unexpected condition was encountered.

Action:

Report this error to Oracle Support Services. Include the operations that led to the error, any unusual circumstances that occurred before receiving this error, and the complete stack trace produced by this error.

WWC-53119 - Your password will expire soon. Please change your password now

Cause:

A password is about to expire.

Action:

Change the password before it expires.

WWC-53120 - Your password is smaller than the minimum required size of a password

Cause:

The password specified was less than the minimum required length required for passwords.

Action:

Specify a password that is equal to, or greater than, the minimum required password length. If necessary, contact the portal administrator to confirm the minimum required length of passwords.

WWC-53121 - Your password does not contain the minimum number of numeric characters required

Cause:

The password specified did not contain the minimum number of numeric characters required.

Action:

Specify a password that contains at least the minimum number of numeric characters required. If necessary, contact the portal administrator to confirm the minimum number of numeric characters required for passwords.

WWC-53122 - Your password cannot be null

Cause:

A null value was specified for a password.

Action:

Specify a valid password.

WWC-53123 - Your new password cannot be the same as your old password

Cause:

While changing a password, the new password was the same as the previous password.

Action:

Specify a new password that is different from the previous password.

WWC-53124 - Your password contains an illegal value

Cause:

The password specified contained one or more illegal characters.

Action:

Specify a password that does not contain any illegal characters.

WWC-53125 - Your password has expired. You should change your password soon

Cause:

A password has expired but the user has been allowed to login and change the password.

Action:

Change the password as soon as possible.

WWC-53126 - Your password has expired. Contact your Administrator to change your password

Cause:

A password has expired.

Action:

Contact the portal administrator to change the password.

WWC-53127 - A user property was not found

Cause:

An attempt was made to search for a property that does not exist in the directory.

Action:

Check the property name.

WWC-53128 - Your account has been disabled

Cause:

An account has been disabled.

Action:

Contact the portal administrator and request that the account be enabled.

WWC-53129 - A property was not found while searching for the property in the directory

Cause:

An attempt was made to search for a property that does not exist in the directory.

Action:

Check the property name.

WWC-53149 - The Portal was unable to establish contact with the Oracle Internet Directory because the following connection parameters are missing:%1

Cause:

The connection parameters specified were not available.

Action:

Run the command line script ptlasst in MIDTIER mode to configure the Oracle Internet Directory connection parameters: ptlasst -mode MIDTIER -type OID

WWC-53200 - The specified grantee has already been granted %1 privilege. To change the privilege of this grantee, select the appropriate privilege from the drop-down list shown against the name of the grantee and click Apply or OK.

Cause:

An attempt was made to add a privilege for a grantee that has already been granted a different privilege. Only a single privilege can be granted on an object to any grantee.

Action:

Change the privilege of this grantee by selecting the appropriate privilege from the down list shown against the name of the grantee.

WWC-53201 - Value specified for the limit set for total space allocated must be a positive integer.

Cause:

The value specified for the total space allocated was invalid.

Action:

Specify a positive integer for the total space allocated.

WWC-53202 - Value specified for the limit set for maximum file size must be a positive integer.

Cause:

The value specified for the maximum file size was invalid.

Action:

Specify a positive integer for the maximum file size.

WWC-53203 - Value specified for the SMTP port must be a positive integer.

Cause:

The value specified for the SMTP port is invalid.

Action:

Specify a positive integer for the SMTP port.

WWC-53204 - Value specified for the URL connection timeout interval must be a positive integer.

Cause:

The value specified for the URL connection timeout interval is invalid.

Action:

Specify a positive integer for the URL connection timeout interval.

WWC-53205 - Value specified for log switch interval must be a positive integer.

Cause:

The value specified for the log switch interval is invalid.

Action:

Specify a positive integer for the log switch interval.

WWC-53206 - Value specified for the directory synchronization interval must be a positive integer.

Cause:

The value specified for the interval between DIP notifications is invalid.

Action:

Specify a positive integer for the interval between DIP notifications.

WWC-53207 - Value specified for the web cache invalidation port must be a positive integer.

Cause:

The value specified for the invalidation port is invalid.

Action:

Specify a positive integer for the invalidation port.

WWC-53208 - Value specified for the web cache administration port must be a positive integer.

Cause:

The value specified for the administration port is invalid.

Action:

Specify a positive integer for the administration port.

WWC-53209 - Value specified for the maximum web cache expiry time must be a positive integer.

Cause:

The value specified for the maximum expiry time is invalid.

Action:

Specify a positive integer for the maximum expiry time.

WWC-53218 - Cannot set the directory synchronization parameters as the provisioning profile does not exist.

Cause:

An attempt was made to set directory synchronization parameters when the provisioning profile does not exist.

Action:

Create the provisioning profile by running ptlasst using -mode MIDTIER -type DIPREG and retry.

WWC-53220 - An exception occurred while creating the user account in the Oracle Internet Directory. Verify that the specified password conforms to the password policy.

Cause:

The password specified violated the password policy or an attribute value was invalid.

Action:

Specify a password that complies with the password policy and retry. Contact the portal administrator if the problem persists.

WWC-53221 - An exception occurred while creating the user account in the Oracle Internet Directory: %1

Cause:

The password specified violated the password policy or an attribute value was invalid. The error message provides specific information about the cause.

Action:

Take appropriate action based on the error message. Contact the portal administrator if the problem persists.

WWC-53222 - An invalid parameter value was specified in the URL.

Cause:

The value specified for the parameter in the URL is invalid.

Action:

Provide the correct value for the parameter and re-submit the request or login to the OracleAS Single Sign-On Server again.

WWC-53314 - Number of users returned exceed the search return limit. Narrow the search criteria and try again.

Cause:

A large number of users matched the search criteria specified.

Action:

Change the search criteria so that a smaller number of users is returned. Alternatively, contact the portal administrator and request that the LOV size limit be increased.

WWC-53366 - Number of groups returned exceed the search return limit. Narrow the search criteria and try again.

Cause:

A large number of groups matched the search criteria specified.

Action:

Change the search criteria so that a smaller number of groups is returned. Alternatively, contact the portal administrator and request that the LOV size limit be increased.

WWC-53377 - The external application does not exist and may have been deleted. Update your link. If using the External Applications portlet, customize the portlet to update the list of links.

Cause:

Some of the existing external application links are no longer valid.

Action:

Refresh the portlet so that these obselete links are removed.

WWC-57102 - To perform this action, select a portlet or tab using the checkboxes below

Cause:

An action button was clicked without first selecting any portlets or tabs.

Action:

Select one or more portlets or tabs before clicking an action button.

WWC-57103 - No region selected. Select a region then click %1.

Cause:

An attempt was made to copy or move an item to a page that does not have an item region.

Action:

Create an item region, and then copy or move the item.

WWC-57106 - To perform this action, select a portlet, item or level using the checkboxes below

Cause:

An action button was clicked without first selecting any portlets, items, or levels.

Action:

Select one or more portlets, items, or levels before clicking an action button.

WWC-57124 - Moving tabs is not allowed. Only portlets can be moved using the Move button. To reorder tabs, click the Arrange Tabs icon.

Cause:

An attempt was made to move a tab. Tabs cannot be moved between regions.

Action:

Although tabs cannot be moved between regions, you may reorder tabs within a single tab region. To reorder tabs, click the Arrange Tabs icon in the tab region.

WWC-57186 - Page %1 is a system level cache page; no personalization is allowed.

Cause:

An attempt was made to personalize a page that is cached at the system level. This is not permitted because all users see the same content on such pages. Only pages that are cached at the user level (or not cached at all) can be personalized.

Action:

To modify this page, make changes affecting all users; this requires privileges to edit the page.

WWC-57216 - Invalid number of rows. Value should be at least be 1.

Cause:

The value specified for the number of rows was invalid.

Action:

Specify a positive number for the number of rows in the region.

WWC-57239 - Choose a page for the template input parameter

Cause:

Page was specified as the value type for the template input, but a page was not selected.

Action:

Click the Browse Pages icon and choose a page for the template input.

WWC-57267 - An error occurred while configuring the page group.

Cause:

An attempt to configure a page group failed.

Action:

Refresh the screen and verify that the page group is still available.

WWC-57268 - Error while writing parameter metadata: %1

Cause:

An attempt to write parameter metadata failed.

Action:

Refresh the screen and verify that the parameter is still available.

WWC-57269 - The parent object '%1' does not have a valid ID.

Cause:

The parent object ID was invalid.

Action:

Refresh the screen and verify that the parent object is still available.

WWC-57270 - Error during a flow link change event: %1

Cause:

An attempt to update a flow link failed.

Action:

Refresh the screen and verify that the dependent pages are still available.

WWC-57272 - The reference path %1 for the portlet instance %2 is not valid.

Cause:

The format of the reference path was incorrect. The correct format is __.

Action:

Specify correct values and use the correct reference path format.

WWC-57305 - Tab pages cannot be edited directly

Cause:

An attempt was made to directly edit a tab.

Action:

Edit the page that contains the tab.

WWC-57306 - This page cannot be edited in Layout Mode

Cause:

An attempt was made to edit a PL/SQL, JSP, or URL page in Layout Mode. Only standard pages can be edited in Layout Mode.

Action:

Edit the page properties from the Navigator, or edit the page content using an editor appropriate for the page type.

WWC-57307 - Invalid expiry value. Value should be at least be 1 minute.

Cause:

The value specified for the cache expiration time was invalid.

Action:

Specify a positive number for the cache expiration time.

WWC-57323 - The selected portal template was not found.

Cause:

The selected portal template could not be found. The page may have been deleted.

Action:

Choose another portal template.

WWC-57324 - The selected page does not contain any item placeholders.

Cause:

The selected page does not contain any placeholder items, so it cannot be used as a portal template.

Action:

Choose a page that contains placeholder items.

WWC-57331 - Specify a numeric value for height.

Cause:

The value specified for the region height was invalid.

Action:

Specify a number (preferably between 1 and 100) for the region height. Note that leaving this field blank is the same as entering 1.

WWC-57354 - Invalid timeout value. Value should be number (zero or more).

Cause:

The value specified for the page timeout was invalid.

Action:

Specify a positive number for the page timeout.

WWC-57357 - In order to choose another option, you must first Detach the portal template.

Cause:

An attempt was made to choose another template option without first detaching the current template.

Action:

Click Detach from Template to remove the template from the page, then proceed.

WWC-57365 - The given tabstring for the page is invalid.

Cause:

The tabstring specified for the page is invalid.

Action:

Specify a valid tabstring for the page.

WWC-57381 - The language specified in the URL is invalid.

Cause:

The URL specified contained an invalid language element, for example, it may have been null.

Action:

Specify a different language element, or remove it completely.

WWC-57382 - The version specified in the URL is invalid.

Cause:

The URL specified contained an invalid version element, for example, it may have been null.

Action:

Specify a different version element, or remove it completely.

WWC-57383 - The language specified in the URL is not currently supported by this Portal.

Cause:

The URL specified contained a reference to a language that does not represent a legitimate language code, or is not currently available in this portal.

Action:

Specify a different language element, or remove it completely.

WWC-57384 - The URL contains a reference to a version, but specifies a page: Portal does not support versioning of pages.

Cause:

The URL specified requested a page and a version. OracleAS Portal does not support versioning of pages and cannot resolve this URL.

Action:

Remove the version element from the URL.

WWC-57385 - The template could not be detached from the page because you do not have privileges to access one or more portlets on the template.

Cause:

An attempt was made to detach a template from a page, but the user does not have the privileges to access every portlet on the template. These privileges are required as, when detaching a template, the portlets on the template are copied to the page.

Action:

Contact the portal administrator and request that the appropriate privileges be granted.

WWC-57421 - Specify a numeric value for the space between items.

Cause:

The value specified for the Space between Items field was invalid.

Action:

Specify a number (preferably betweeen 1 and 100) for the Space between Items field. If you do not want any space between items, specify 0 or null.

WWC-57422 - Specify a numeric value for the space around items.

Cause:

The value specified for the Space around Items field was invalid.

Action:

Specify a number (preferably between 1 and 100) for the Space around Items field. If you do not want any space around items, specify 0 or null.

WWC-11